...
To turn on Terminal Monitoring, enter the following command at the Exec Prompt:term monNow
| Code Block | ||
|---|---|---|
| ||
term mon |
Now you should be able to debug from the SSH session and see the debug information.
...
Allow multiple SSIDs to broadcast at the same time:
| Code Block | ||
|---|---|---|
| ||
ap(config)# interface d0 ap(config-if)# mbssid ap(config-if)# exit ap(config)# dot11 ssid visitor ap(config-ssid)# mbssid guest-mode dtim-period 75 ap(config-ssid)# exit ap(config)# interface d0 ap(config-if)# ssid visitor ap(config-if)# exit ap(config)# dot11 ssid corporate ap(config-ssid)# mbssid guest-mode dtim-period 75 ap(config-ssid)# exit ap(config)# interface d0 ap(config-if)# ssid corporate ap(config-if)# exit |
...
- Install IAS on a Windows 2003 Server with Certificate Authority or Domain Controller
- Configure Access Point with 802.1x for WPA/WPA2
| Code Block | ||
|---|---|---|
| ||
ap(config)# radius-server host RADIUS_IP auth-port 1645 acct-port 1646 key INSERT_KEY ap(config)# aaa group server radius RADIUS_EAP ap(config)# server RADIUS_IP auth-port 1645 acct-port 1646 ap(config)# aaa authentication login EAP_METHODS group RADIUS_EAP ap(config)# dot11 ssid SSID_EXAMPLE ap(config-ssid)# vlan 15 ap(config-ssid)# authentication open eap EAP_METHODS ap(config-ssid)# authentication network-eap EAP_METHODS ap(config-ssid)# authentication key-management wpa ap(config-ssid)# mbssid guest-mode |